Maintenance
7-8
7.4.1 Replacing the Glass-plate
Some scanner models are designed so users can detach the glass-plate from the scanner in
order to replace scratched glass-plates with new ones. On other scanner models, a service
technician must perform this process. See your scanner’s model specifications to see if the
glass-plate is detachable.
Replacing the Glass-plate:
On Scanners:
1.
Turn the scanner power off and disconnect the power plug.
2. Place your fingers in the insertion slot and flip open the scanning area lid.
3. The drive system automatically lifts up.
4. Lift out the pressure-platen to expose the glass-plate underneath.
5. On the right side of the glass-plate there is a small round finger-handle.
6. Place your finger under the finger-handle and lift the glass-plate’s right side upwards.
7. As soon as there is space under the glass-plate, use your free hand to grip under the
glass-plate and carefully lift it out of the scanner.
8. Reverse the process to reinsert a new glass-plate. Position the right side of the new
glass-plate in the scanner and let down the right side using the round finger-handle.
9. Reinsert the pressure-platen so its braces rest on the parallel drive axles.
Summary of Contents for GS67D
Page 3: ......
