![background image](http://html1.mh-extra.com/html/conair/carousel-plus-d-series/carousel-plus-d-series_user-manual_2649057152.webp)
6 - 4 0
l Tr o u b l e s h o o t i n g
R e p l a c i n g t h e D e s i c c a n t W h e e l
A s s e m b l y
( D 1 3 0 0 - 5 0 0 0 )
If you need to service the desiccant wheel assembly (wheel, motor, belts, etc.), use the fol-
lowing procedure to remove the entire assembly from the dryer.
1
Stop the dryer, disconnect and lockout the main power.
2
Remove the upper and lower side panels from both sides of the
dryer
.
3
Remove the top cover from the dryer
by removing the securing bolts.
4
Note the position of all the hoses, RTDs, and wiring connections then remove or
disconnect
these from the desiccant wheel assembly.
5
Remove the bolts securing the desiccant wheel assembly to the dryer frame.
6
Note the orientation of the desiccant wheel assembly.
Using an overhead crane or
similar device, use the lifting rings provided and lift the desiccant wheel assem-
bly out of the dryer.
To replace the wheel assembly, reverse the procedure above.
NOTE:
If your dryer is configured with a hard pipe kit, disconnect the hard piping from the top of the
dryer at this time.
0
OFF
O
ON
I
Summary of Contents for Carousel Plus D Series
