![background image](http://html1.mh-extra.com/html/conair/carousel-plus-d-series/carousel-plus-d-series_user-manual_2649057186.webp)
C - 2 4
l A p p e n d i x
S e t t i n g U p Yo u r D M : T h e B a s i c s -
A l a r m S e t p o i n t
Alarm Setpoint
The alarm setpoint is automatically established on the “Hopper Settings” screen but can
be adjusted on the set-up screen. This value acts as a default level of temperature per-
formance. If the temperature reported on the alarm location falls below this level for
longer than an adjustable time range (default, 5 minutes), the DM will alarm that the
material is not being properly dried. The alarm setpoint relationship with the process
setpoint (referred to as “band”) as well as the time range before alarm notification can
be adjusted on the Set up screen.
Remote Heat Source Procedure
1
Press setup button from the
home screen
(logged in at
appropriate level to see setup
button),
2
Press Alarm setup button
(tri-
angle with wrench) from setup
screen .
3
Set settings for probe
postition temperatures
that
you would like to activate the
alarm notifications from Alarm
setup screen,
Once the process temperature and alarm location are established for the first hopper, the
remaining hoppers in the system may be set up in an identical fashion.
Once hopper settings are made, only setting the Process Temp is required to align the
DM functions with a particular drying application. But if necessary, further fine tuning
of the process conditions can be made on the DM Set-up screen.
Summary of Contents for Carousel Plus D Series
