![background image](http://html1.mh-extra.com/html/conair/carousel-plus-d-series/carousel-plus-d-series_user-manual_2649057171.webp)
P r e p a r i n g f o r I n s t a l l a t i o n
In addition to mounting the probe into the hopper, each hopper will be equipped with
an RTD Junction Box. This box provides the link from the probe to the ModBus
interconnection cables that will connect each hopper to the heater control panel.
The RTD Junction Box should be mounted in a safe location, at the top of the hopper
as near as possible to the hopper probe and if possible, not directly above the hopper,
to minimize transmitted heat from the hopper to the junction box. Stay clear of load-
ing equipment that may require service access and be sure to mount the box so that it
is not likely to be used as step or hand-hold during service procedures.
A p p e n d i x l
C - 9
IMPORTANT:
The DC-C
controlled dryer, and
any junction boxes
should not be installed
in extreme temperature
locations. Ambient air
temperatures below
41°F {5°C} and above
104°F {40°C} should be
avoided.
Summary of Contents for Carousel Plus D Series
