![background image](http://html1.mh-extra.com/html/conair/carousel-plus-d-series/carousel-plus-d-series_user-manual_2649057067.webp)
4
Opera
tion
(continued)
O p e r a t i o n l
4 - 2 7
C o n t r o l F u n c t i o n D e s c r i p t i o n s - R W
C o n f i g u r a t i o n
( c o n t i n u e d )
Trending
(Dryer Trends)
To access the Dryer Trending screens:
1
Press the Trending button
on the
Navigation or hopper screen.
2
Press the Trend button.
The Trend Selection screen displays the various trends. Press the next tend button on the
bottom left of each screen to advance to the next screen.
•
Temperature Trends
•
On-time Trends
•
Dewpoint Trends
•
Energy Use Trends
Trending Screen Navigation
Each trending screen will allow the user to
scroll through data. When the screen first
opens, it will display values sampled every 15
seconds. Each colored line represents a pen or
variable being trended. Up to 14 days of data is
recorded and available for review. The scroll
buttons near the bottom of the screen allow the
user to scroll back to an earlier time or forward
to the present time, or jump immediately to live
data. The user can also touch any point on the
trend line and the display will show the data
reading, date, and time for that spot in the trend.
Scroll to the beginning or end of the record.
Scroll back or forward one point at a time (30 seconds).
Move to the next trend screen.
Zoom in (Instead of seeing 2 hours of trend in the window, you will see 1 hour,
30 minutes, 15 minutes, etc.)
Zoom out (Instead of seeing 2 hours of trend in the window, you will see 3 hours,
4 hours, 5 hours, etc.)
NOTE:
Depending on your DC-C
configuration, and system secu-
rity, different users may not be
able to access the trending
screens. Additional trend screens
are available on the optional
ResinWorks HMI screen at each
hopper.
0
2
TIP:
A dashed line or a
break in the trend line
represents a time
where power to the
dryer was off (either
due to shutdown or to
power outage).
NOTE:
When there is more
than one heat source, the
drying monitor, setback
and delivery air tempera-
ture are part of the hopper
not the dryer. If it is a
single heat source, inter-
nal electric, HTC or CGT,
this is all part of the dryer.
0
Summary of Contents for Carousel Plus D Series
