Conair Carousel Plus D Series, User Manual

Page: 100 / 208

5 - 4 l M a i n t e n a n c e
C h e c k i n g t h e D e w p o i n t
It is a good idea to monitor the dewpoint performance of your dryer periodically with a cali-
brated portable dewpoint monitor, to ensure it is performing at maximum capacity. Even if
your dryer has a dewpoint readout, comparing it to a portable instrument periodically will
confirm that the dewpoint sensor and readout is performing properly.
To check dewpoint:
1
Connect your portable dewpoint meter to the
dewpoint check port on the rear panel of the
dryer.
2
Turn on the portable instrument, and ensure
there is positive airflow through the sensor.
3
Monitor the readout and allow ample time for it to stabilize before disconnecting the
portable dewpoint monitor.
Some dewpoint monitors require a substantial amount of
time for residual moisture to be purged from the sensor.
4
In the event the dewpoint is not satisfactory,
refer to the Troubleshooting section of this
manual, under Delivery Air Dewpoint alarm.
NOTE: The DC-C control is av-
eraging the dewpoint over time.
Allow the system to stabilize to
ensure an accurate reading.
0