![background image](http://html1.mh-extra.com/html/conair/carousel-plus-d-series/carousel-plus-d-series_user-manual_2649057106.webp)
5 - 1 0
l M a i n t e n a n c e
C l e a n i n g t h e A f t e r c o o l e r C o i l s
( c o n t i n u e d )
5
Clean the assembly using a mild soap and water.
Let the assembly dry thoroughly
before installation.
NOTE:
In cases of heavy volatiles, steam cleaning, pressure washing or the use of solvents, such as
acetone, may be necessary. Be sure to test a small area with the solvent you have selected to be
sure there is no adverse reaction.
6
Inspect the condition of the gasket.
If it is damaged, replace the gasket.
7
Reassemble
by repeating the steps in reverse order.
8
Connect the water supply line and return lines.
9
Open valves to return water to the system.
0
D r a i n i n g t h e V o l a t i l e D r a i n
The volatile drain (if equipped) is located at the
back of the dryer.
1
Place a bucket or container below the
volatile drain valve at the back of the dryer.
2
Open the volatile drain valve.
Liquid should
begin to drain.
3
All the valve to completely drain.
This may
take a few minutes.
4
Close the drain valve.
5
Properly dispose of (in accordance with all regulations) the drained fluid.
Summary of Contents for Carousel Plus D Series
