Collamat Etiprint Inline, Operating Instructions Manual

Page: 38 / 188

Etiprint Inline
Commissioning and operating
38
Setting the inclination of the
dispensing applicator (cont.) Procedure:
Loosen the knurled nut (
2 ) on the rotating mechanism ( 3 ) then
pull the cog wheel out by hand. Set the desired applicator
inclination and re-tighten the knurled nut
NOTE!
If the applicator inclination is so great that the two
paper strips between the two guide rollers rub
against each other, then the returning backing
paper should be threaded under the second guide
roller.
Setting the dispensing applicator
press-on roller The applicator press-on roller must be adjusted according to label
and product.
Procedure:
horizontal adjustment with the knurled screw 1
vertical adjustment with the hexagon screw 2
Fig. 10: Press-on roller
1 Knurled screw 2 Hexagon nut