Collamat Etiprint Inline, Operating Instructions Manual

Page: 111 / 188

5.8 Maximum Speed
The Maximum Speed function limits the max. dispensing speed to the entered value. This functi-
on is necessary, if the goods speed is not stable or if labelling is problematic due to difficult label
material with higher speed than usual. For labelling using speed measuring the dispensing speed
is limited automatically to this value.
MAX. SPEED
Value : 50 m/Min
5.9 Good suppression
The Good Suppression function is used, when a good (e.g. cartons for eggs) can supply more
than one start pulse for labelling. Entering can be aborted with the ESC key.
GOOD SUPPRESSION
Length : 100 mm
5.10 Labelling mode
The Labelling mode function allows the choice of three labelling modes:
Normal labelling
Multiple labelling
Delayed predispensing
5.10.1 Normal Mode
As a rule the Normal labelling mode is switched on and it is labelled without any special function.
LABELLING MODE
Choice : Normal
programmer
STOP
User level:
Operating mode:
programmer
STOP
User level:
Operating mode:
programmer
STOP User level:
Operating mode:
5999.530-01F 07.04.2006 WM

24