Collamat Etiprint Inline, Operating Instructions Manual

Page: 46 / 188

Etiprint Inline
Maintenance
46
8.3 Cleaning
In the case of surface contamination, proceed as follows:
1. Switch off plant and secure against re-starting.
2. Remove contamination in the proper manner. Note here:
Do not use aggressive cleaning agents.
Soak up oil deposits with oil absorbing materials (e.g.
sawdust).
Dispose of cleaning rags and process remains in
accordance with the applicable local regulations.
After cleaning work, check that all previously opened
covers and safety equipment are properly closed again
and fully functional.
CAUTION!
Damage to equipment possible through
improper cleaning!
Aggressive cleaning agents and implements can
damage or destroy the guide plates, pneumatic
hoses, electrical cables and adjacent components.
Therefore:
– Do not use cleaning agents containing
aggressive substances.
– Never remove glue residues using sharp-edged
or pointed implements, knives or similar tools.
NOTE!
Always remove adhered labels as quickly as
possible. The longer they remain adhered to the
equipment, the stronger the adhesion becomes!