Collamat Etiprint Inline, Operating Instructions Manual

Page: 146 / 188

6 The Monitor C8600
The monitor must be unplugged from the mains supply before it is opened.
Inside of the monitor charged capacitors can lead to shock hazard. Wait at
least 10 seconds before opening the monitor.
6.1 Construction
All the controller electronics for the Collamat 8600 labeler are built in to a stable steel cabinet.
This cabinet contains no adjustable controls inside. All settings can be done by keyboard. After
removing the two screws from the backpanel the cover can be separated from the heatsink.
Figure 11: Monitor
Legend
1.
Cover 7. Mains switch
2. Flatcable 8. Interfaceboard
3. Control panel 9. Heatsink
4.
Motordriver
10.
Transformer
5. Backpanel 11. Locker screws
6. Mains filter board 12. Mounting clamp
The cover 1 carries the control panel 3 and protects the parts inside the monitor. It can be re-
moved after unlocking the screws 11 and slightly shifting the cover to the front side of the
heatsink 9 .
ATTENTION:
The cover must be removed carefully. Otherwise the flatcable 2 or its con-
nectors can be damaged.
1
2
3
4
5
6
7
8
9
10
11
11
12
5999.545-01G 28.02.2006 WM
Page 16 / 65