Collamat Etiprint Inline, Operating Instructions Manual

Page: 53 / 188

Etiprint Inline
Malfunctions, repair and maintenance work
53
9.4.3 Setting the hanger spring tension
The spring tension is to be set o that the retraction force is not
greater than required by the hanger to return itself. To adjust, push
in the rotating knob (1) and set it to the appropriate spring tension.
The hanger should be held firmly while adjusting the spring
tension. Finally, let the rotary knob go and it will detent in the new
position.
Fig. 14: Setting the hanger spring tension
1 Rotary knob for adjusting the spring tension