Chapter 5: Configuration with web interface
98-169085-B
Advanced settings
90
Power save
There are a number of options to save power in the EXPLORER 323. For a general description of
the power save options, see
To set up the power save options, do as follows:
1. Under
Advanced
, select
Power control
.
2. Select the mode you want to use.
•
Always on
. This is the default setting. The terminal will never go into power save state
but will always be on when connected to power.
•
Idle power save
. The terminal will go into power save state after a (configured) period
with no activity. For details, see the next section
.
•
Remote on/off
. The terminal will go into power save state when the Power control pin
(Remote on/off signal) is inactive. For details, see
3. Click
Save
.
Idle power save mode
1. In the
Power control
page, select
Idle power save
from the drop-down list.
