Chapter 4: To use the EXPLORER 323
98-169085-B
To control data connections
33
To access the terminal using AT commands
1. Connect your computer to the EXPLORER 323 terminal.
You may connect directly to the terminal or use a remote connection as described in the
next sections.
2. On the connected computer, start a Telnet session.
3. Select TCP/IP and type in the IP address and port number.
• For
local connection
, use the local IP address of the EXPLORER 323 (default
192.168.0.1) and port number 5454.
• For
remote connection
, use the external IP address of the terminal (step 4 in the
section
To get remote access from a trusted IP address (preconfigured)
on page 27).
The port number for AT commands is normally 5454, but is defined in the Remote
management page under AT commands (see
To set up remote access with IP
on
page 71).
4. When the connection is established, type in your AT commands.
