Chapter 5: Configuration with web interface
98-169085-B
Advanced settings
94
9. In the
Transfer delay (error correction)
field, select
Enabled
,
Disabled
or
Network
controlled
.
• Enabled: Error correction is applied
• Disabled: Error correction is disabled (recommended for time critical applications)
• Network controlled: Error correction determined by network
10. Click
Save
.
The new template will now be available for selection when you build your connection
packages.
Traffic flow filter templates
The traffic flow filters are used to filter the data traffic, so you can use different connection
types for different types of traffic. There are two predefined filters, UDP and TCP.
•
UDP
is used for traffic using UDP protocol (such as video streaming or Voice over IP)
•
TCP
is used for traffic using TCP protocol (such as web browsing).
You can also select
No filter
. This option is only suitable for the last connection you add to a
connection package, because the filters are applied in the order they are added to the
connection package. See
If the predefined filters do not meet your requirements, you can create additional filter
templates. Do as follows:
1. Under
Advanced
, select
Templates
.
2. Select
Traffic flow filters
.
3. To delete a traffic flow filter, click
?
in the right side of the filter tile.
4. To add a new traffic flow filter, click
Add template
and proceed with the next steps.
