Chapter 3: To get started
98-169085-B
To start and stop data connections
24
To start and stop data connections
By default, you have to start a data connection manually when the terminal is ready and
connected to the BGAN network. However, you can enable automatic activation of a data
connection. See
Internet and LAN connection modes
To start and stop data connections on your EXPLORER 323, do as follows:
1. On the connected device, open your browser and type the IP address of the terminal
(default IP address:
192.168.0.1
) in the address bar to access the web interface, or
On your smartphone, start the
EXPLORER Connect
app and select
Terminal access
.
2. Locate the connection package you want to start.
3. Click
to start the connection.
4. Click
to stop the connection.
For details, see
To control data connections from web interface
Note
The icons for starting
and stopping
connections are only active if the
terminal is ready and registered on the network. Otherwise you cannot start data
connections.
Note
Once a Streaming connection is started, the connection will run until you stop it.
You will be charged for the time you are connected.
