COBHAM EXPLORER 323, User & Installation Manual

Page: 40 / 158

Chapter 4: To use the EXPLORER 323
98-169085-B To control data connections 31
• Access the web interface locally and click the tile for the data connection on the
dashboard, see To start and stop data connections on page 47, or
• Send an AT command to the terminal. See To configure the connected equipment for
PPPoE
on page 32,
To access the terminal using AT commands
on page 33 and
Context management AT commands on page 133.
PPPoE (Point-to-Point Protocol over Ethernet)
Overview
You can establish a PPPoE connection to the BGAN network using the EXPLORER 323 system.
Use PPPoE if you want to control your connection independently of the web interface.
Possible applications are:
• Connect an EXPLORER Mobile Gateway, see
PTT connection example
on page 15
• Connect a router
• Connect broadcast equipment, optionally through a PC
• Establish a Picocell for the use of cell phones
The drawing shows connections managed through PPPoE and web interface respectively.
BGAN terminal
PDP Context, up to 11
BGAN
nework
Built-in
web
interface
PPPoE
connection
PC and/or broadcast equipment
User PC 1
Applications
for PPPoE
Handling connection
to the BGAN terminal
Assigning connection
(PDP context) to go out
on the BGAN network
Router
Pico cell
PPPoE
connection
User PC 2
PPPoE
connection
IP Handset