Appendix B: Command reference
98-169085-B
Configuration examples
137
To set up power save functions with AT commands
For details on how to use AT commands see
To access the terminal using AT commands
You can set up the following power save functions with AT commands:
• Remote on/off
• Idle time and Daily wake-up
Remote on/off
With the AT command AT_ITREMONOFF you can set up
• Enable or disable the Remote on/off function
• Shut down delay after the Power control pin is deactivated
• Daily awake period (time of day and duration)
• Polarity of the Power control pin (active high or low)
Set up the Remote on/off function as follows:
1. Type in the AT command:
AT_ITREMONOFF=<active mode>,<power down delay>,<awake time of day>,<awake
duration>,<polarity>
Example:
AT_ITREMONOFF=1,3,60,10,HIGH
In the example above, Remote on/off is activated (1) with 3 minutes shut down delay (3),
awake time of day 60 minutes after midnight (60), 10 minutes duration of awake time (10)
and Power control pin active high (HIGH).
Important
Before configuring the remote on/off function, connect the Power control pin as
described in
Note
If you set Awake time of day to
0
, the daily awake period is disabled.
Note
Changing <active mode> from
1
to
0
will change the power mode from Remote
on/off to Always on.
Changing <active mode> from
0
to
1
will change the power mode to Remote on/off.
