Appendix B: Command reference
98-169085-B
AT commands
126
M2M related AT commands
The following tables summarize some of the most used AT commands for M2M operation.
Parameters are explained in
for other M2M related AT commands
ATCO commands
The table below summarizes the ATCO commands, i.e. AT commands that can be used in the
SMS command
ATCO
.
Parameters for ATCO commands
Command
Parameters
_ICPWD
<type>,<old passwd>,<new passwd>
_IGETFILE
<ftp dir>,<filename>,<local dir>,<ftp server>,<ftp uname>,<ftp passwd>[,<apn>[,<apn
uname>[,<apn passwd>]]]
_IGETFW
<mode>[,<ftp server>[,<ftp uname>[,<ftp passwd>[,<apn>[,<apn uname>[,<apn passwd>]]]]]]
_IREMWEB
<enable>,<ip_addr_lo>[,<ip_addr_hi>][,<apn>[,<apn uname>,<apn passwd>]]
_ISENDFILE
<local dir>,<filename>,<ftp dir>,<ftp server>,<ftp uname>,<ftp passwd>[,<apn>[,<apn
uname>[,<apn passwd>]]]
_IUPDCFG
<filename>
_IUPDFW
<filename>
Parameter
Values
Meaning
<apn passwd>
<apn passwd>
Password for the APN.
<apn uname>
<apn uname>
User name for the APN.
<apn>
<apn>
APN name.
<enable>
0
1
Disable.
Enable.
<filename>
<filename>
The name of the file to use, including extension.
<ftp dir>
<ftp dir>
The name of the directory on the ftp server to use for getting or saving a file.
<ftp passwd>
<ftp passwd>
Password for the ftp server.
<ftp server>
<ftp server>
Host name or IP address of the ftp server.
<ftp uname>
<ftp uname>
User name for the ftp server.
<ip_addr_hi>
<ip_addr_hi>
The upper IP address of a range of allowed IP addresses. This parameter is
optional; if omitted, only the specified single IP address <ip_addr_lo> may
access the EXPLORER 323.
