Club Car Precedent Villager 2, Maintenance And Service Manual

Page: 282 / 414

19
Starter/Generator
GASOLINE VEHICLE - ELECTRICAL
COMPONENTS
Figure 19-5 Pull Brushes Away From Center of the Commutator End Cover
DISASSEMBLY OF THE STARTER/GENERATOR TO SERVICE THE
ARMATURE/COMMUTATOR
1. Remove the commutator end cover to prevent damage to the brushes and armature. See Commutator End
Cover on page 19-2.
2. To separate armature and output end cover assembly from the field coil housing, first remove the two securing
bolts (43). Carefully remove armature and output end cover assembly from the field coil housing so components
are not damaged.
3. To separate armature (33) from output end cover (36), remove nut (41), lock washer (40), pulley (39). It may be
necessary to use the wedge attachment tool to remove the pulley from the shaft.
4. Remove the internal retaining ring (32) to release the bearing (35) and armature (33) from the output end cover
(36).
(Figure 19-6, Page 19-5) .
Page 19-4 2019 Precedent Villager 2 Maintenance and Service Manual