Club Car Precedent Villager 2, Maintenance And Service Manual

Page: 38 / 414

4
Floor Mat and Retainers BODY AND TRIM
FLOOR MAT AND RETAINERS
See General Warnings on page 1-2.
The floor mat retainers secure the floor mat to the vehicle and also provide a clean appearance to the side of the
vehicle. Normally, if only the floor mat (3) needs to be removed, the screws (2) must be removed to allow the floor mat
to be slid from beneath the retainers (1)
(Figure 4-5, Page 4-8) .
3
2
1
4
1382
Figure 4-5 Floor Mat Retainer
FLOOR MAT RETAINER REMOVAL
1. Remove screws (2) from top of retainer (1) (Figure 4-5, Page 4-8) .
2. Remove push rivets (4) from rear corners of retainer.
3. Carefully pull on retainer to separate the trim clips from their respective slots. Trim clips do not normally need to
be removed from the retainer.
FLOOR MAT RETAINER INSTALLATION
1. Position the retainer on the vehicle and press firmly to engage the trim clips to the vehicle (Figure 4-5, Page 4-8) .
2. Ensure the floor mat is properly positioned beneath the top flange of the retainer and loosely install two screws (2).
3. Install two push rivets (4) at the rear corners of the retainer.
4. Tighten screws (2) to 4.4 ft·lb (6.0 N·m).
Page 4-8 2019 Precedent Villager 2 Maintenance and Service Manual