Club Car Precedent Villager 2, Maintenance And Service Manual

Page: 166 / 414

13
Charge Indicator Light
ELECTRIC VEHICLE - ELECTRICAL
COMPONENTS
2
1
1
3
4
9
6
8
702
Figure 13-1 Instrument Panel Removal
703
Figure 13-2 Key Switch
CHARGE INDICATOR LIGHT
See General Warnings on page 1-2.
TESTING THE CHARGE INDICATOR LIGHT
See Test Procedure 17 – Charge Indicator Light on page 12-30.
CHARGE INDICATOR LIGHT REMOVAL
1. Disconnect the batteries and discharge the controller. See Disconnecting the Batteries – Electric Vehicles
on page 1-4.
2. Remove instrument panel. See Key Switch Removal on page 13-1.
3. Disconnect the wires at the warning light.
4. Press the two retaining tabs (1) and remove the light from the center dash (Figure 13-3, Page 13-3) .
CHARGE INDICATOR LIGHT INSTALLATION
1. Install in reverse order of removal.
2. Place the Tow/Run switch in the TOW position and connect the batteries. See Connecting the Batteries –
Electric Vehicles on page 1-4.
Page 13-2 2019 Precedent Villager 2 Maintenance and Service Manual