Club Car Precedent Villager 2, Maintenance And Service Manual

Page: 232 / 414

17
Axle Bearing and Shaft ELECTRIC VEHICLE - TRANSAXLE
6.2. Use a press to separate the axle oil seal (15) from the adapter ring (39) (Figure 17-3, Page 17-2) . Retain
the adapter ring and discard the oil seal.
7. Inspect the axle shaft assembly to be sure the bearing and collar have not slipped and are still seated against
the shoulder on the axle shaft.
8. Inspect bearing (5) (Figure 17-5, Page 17-3) . If the bearing in a Type G transaxle is worn or damaged, the
entire axle shaft assembly (1 or 2) must be replaced.
1
2
762
Figure 17-1 Remove Internal Retaining Ring
763
Figure 17-2 Axle Seal and Adapter Ring Removal
15
39
A
A. Adapter Ring Lip
764
Figure 17-3 Axle Seal and Adapter Ring
765
Figure 17-4 Axle Seal and Adapter Ring Installation
Page 17-2 2019 Precedent Villager 2 Maintenance and Service Manual