Club Car Precedent Villager 2, Maintenance And Service Manual

Page: 172 / 414

13
Reverse Buzzer
ELECTRIC VEHICLE - ELECTRICAL
COMPONENTS
REVERSE BUZZER
See General Warnings on page 1-2.
TESTING THE REVERSE BUZZER
See 12-29.
REVERSE BUZZER REMOVAL
1. Disconnect the batteries and discharge the controller. See Disconnecting the Batteries – Electric Vehicles
on page 1-4.
2. Remove instrument panel. See Key Switch Removal on page 13-1.
3. Disconnect the 18-gauge pink and orange/white wires from reverse buzzer.
4. Remove the two screws from the reverse buzzer. Remove the reverse buzzer from the dash panel.
REVERSE BUZZER INSTALLATION
1. Install the reverse buzzer in the reverse order of removal. Pink wire must be connected to the positive terminal.
Tighten screws to 4 in·lb (0.45 N·m).
2. Place the Tow/Run switch in the TOW position and connect the batteries. See Connecting the Batteries –
Electric Vehicles on page 1-4.
3
2
1
4
(Viewed from underside of instrument panel)
A. Pink B. Orange/White
711
Figure 13-7 Reverse Buzzer
Page 13-8 2019 Precedent Villager 2 Maintenance and Service Manual