Club Car Precedent Villager 2, Maintenance And Service Manual

Page: 91 / 414

REAR SUSPENSION Leaf Springs
9
682
Figure 9-1 Support Vehicle on Jack Stands
651
Figure 9-2 Disconnect Brake Cable
LEAF SPRING INSTALLATION
1. To install the springs, reverse the removal procedure. See following CAUTION.
CAUTION
• When positioning the spring on the transaxle, be sure to insert the locating bolt on the spring in the
locating hole in the transaxle saddle.
2. Tighten the nuts on the U-bolts to 25 ft·lb (34 N·m) and tighten nuts (2) on spring mounting bolts (17) to 18.5 ft·lb
(25 N·m)
(Figure 9-3, Page 9-4) .
3. Install tire and wheel assembly. See Wheel Installation, Section 8, Page 8-1.
4. Electric Vehicle: Connect batteries. See Connecting the Batteries – Electric Vehicles, Section 1, Page 1-4.
Gasoline Vehicle: Connect battery and spark plug wire(s).
See Connecting the Battery- Gasoline Vehicles on page 1-3.
2019 Precedent Villager 2 Maintenance and Service Manual Page 9-3