BODY AND TRIM
Floor Mat
Page 4-12 2001 Pioneer 1200 Gasoline Vehicle Maintenance and Service Manual
4
RECEIVER HITCH INSTALLATION
1. Reverse removal procedures to install hitch (14). Tighten hardware to 15 ft-lb (20.3 N·m) (Figure 4-4,
FLOOR MAT
Read WARNING and CAUTION on page 4-1.
FLOOR MAT REMOVAL
1. Remove the brake and accelerator pedals. See Section 5 – Accelerator and Brake Pedal Assem-
2. Remove the top edge of the floor mat from the overlapping flange under the dash.
3. Lift the mat from the vehicle.
FLOOR MAT INSTALLATION
1. Install the floor mat in the reverse order of removal.
2. Install the brake and accelerator pedals. See Section 5 – Accelerator and Brake Pedal Assemblies.
