UNITIZED TRANSAXLE WITH DIFFERENTIAL LOCK
Component Disassembly
2001 Pioneer 1200 Gasoline Vehicle Maintenance and Service Manual Page 16-25
16
∆ CAUTION
• Do not tighten the bearing puller wedge attachment against the shaft. The shaft could be damaged
when pressing the bearing off.
2. Place a bearing puller wedge attachment (CCI 1012812) between the bearing and the larger gear on
the idler shaft, then press the bearing off the shaft (68) (Figure 16-48, Page 16-20) as shown (Figure
Figure 16-58 Remove Idler Shaft
Figure 16-59 Inspect Bearings
Figure 16-60 Synchro. Ring
Figure 16-61 Idler Shaft
ARBOR
PRESS RAM
WEDGE
ATTACHMENT
A
B
X
Press bearing
onto idler shaft.
Turn idler shaft
over and press
bearing on
other end.
B
A
