ELECTRICAL COMPONENTS
Ignition Coil
Page 12-26 2001 Pioneer 1200 Gasoline Vehicle Maintenance and Service Manual
12
4. Remove the muffler. See Section 15 – Exhaust System.
5. Cut the wire tie holding the wire harness to the stiffener (1) and remove the bolts (2) and nuts (3) secur-
ing the stiffener to the mounting plate (4) (Figure 12-25, Page 12-26).
6. Remove the pan head bolts (5) securing the fan shroud (8) to the fan housing (9) (Figure 12-26, Page
7. Loosen but do not remove three bolts (6) attaching the fan housing as shown.
8. Remove the remaining four bolts (10) attaching the fan housing as shown (Figure 12-26, Page 12-26),
then while opening the housing, detach the spark plug wire grommet (4) from the housing (Figure 12-
28, Page 12-27).
9. Disconnect the 18 gauge black wire (12) from the spade terminal on the ignition coil (11) and remove
the coil by removing two bolts (10) (Figure 12-27, Page 12-26).
Figure 12-25 Remove Stiffener
Figure 12-26 Remove Fan Housing
Figure 12-27 Remove Ignition Coil
ClubCar
3
4
1
2
REMOVE
6
10
8
9
5
12
11
10
