EXPORT POWERDRIVE BATTERY CHARGER (EXTERNAL)
The Charge Circuit
2008 Export Battery Charger Maintenance and Service Manual
Page 3-7
3
LIMO – 6 X 8-VOLT
The vehicle charge circuit consists of the following components:
•
charger receptacle
•
receptacle fuse link
•
sense lead fuse
•
onboard computer
•
batteries
The negative terminal of the receptacle is connected to the onboard computer
(Figure 3-7, Page 3-8)
. The
10-gauge black wire from the onboard computer connects to the B– terminal on the speed controller, and the
6-gauge black wire (also on the controller B– terminal) goes through the onboard computer and connects to
the negative (–) post of battery no. 6. The positive terminal of the charger receptacle is connected to the pos-
itive (+) post of battery no. 1. The gray wire from the onboard computer is connected to the charger recepta-
cle.
If the charger works with one vehicle, but does not work with another vehicle, then most likely the problem is
in the vehicle charge circuit. Check the connections between the 18-gauge gray wire from the charger recep-
tacle, the sense lead fuse, and the 18-gauge gray wire from the onboard computer. In addition, check the
charger receptacle fuse link and its connections
.
Figure 3-6 Charge Circuit and Style C Battery Configuration – 6 x 8-Volt Precedent Vehicles
S1
S2
B+
M–
B–
1
2
4
3
6
5
#10 BLA
CK
#6 RED
#6 BLA
CK
#6 BLA
CK
#6 BLA
CK
BATTERY
BANK
#10 BLA
CK
#10
RED
#10
RED
#18 GRA
Y
ONBOARD
COMPUTER
FRONT
OF VEHICLE
SINGLE
POSITION
CONNECTOR
CHARGER
RECEPTACLE
SOLID STATE
SPEED CONTROLLER
TO SOLENOID