![background image](http://html.mh-extra.com/html/club-car/2008-export-battery-charger/2008-export-battery-charger_maintenance-service-manual_2626717129.webp)
EXPORT IQ PLUS CHARGER (EXTERNAL)
Charger Repairs
2008 Export Battery Charger Maintenance and Service Manual
Page 5-33
5
3. Disconnect the two black wires attached to top circuit breaker
(Figure 5-6, Page 5-9)
.
4. Disconnect the two black wires attached to bottom circuit breaker.
5. With a pair of pliers, squeeze in the retaining tabs on the sides of the top AC circuit breaker and remove
the circuit breaker through the mounting hole in the face of the charger.
6. Repeat step 5 for the removal of the bottom circuit breaker.
AC Circuit Breaker Installation
Install in reverse order of removal.
AC CHARGER RECEPTACLE
See General Warning, Section 1, Page 1-1. See additional WARNING on page 5-1.
AC Charger Receptacle Removal
1. Disconnect AC cord from the wall outlet and DC plug from the vehicle receptacle.
See WARNING on
page 5-27.
2. Remove the charger cover.
3. Disconnect the two black wires from the AC charger receptacle
(Figure 5-6, Page 5-9)
.
4. Disconnect the green/yellow wire from the AC charger receptacle.
5. Press the retaining tabs on the top and bottom of the AC charger receptacle and remove the AC charger
receptacle from the font of the charger.
AC Charger Receptacle Installation
1. Press the AC charger receptacle into the opening in the front panel of the battery charger.
2. Connect the green/yellow (ground) wire to the center terminal of the AC charger receptacle.
3. Connect the two black wires to the bottom terminals of the AC charger receptacle.
4. Install the charger cover.