manualshive.com logo in svg

Cisco SR520-FE-K9, Administration Manual

The Cisco SR520-FE-K9 is a powerful networking device that allows seamless connectivity and secure data transmission. To assist users in harnessing its full potential, an extensive Administration Manual is available for download, free of charge, from our website. Explore advanced features and configurations with ease, ensuring optimal performance and satisfaction.

Share
Download
background image

Configuring Voice

Configuring Voice Services

Cisco SRP500 Series Services Ready Platforms Administration Guide (SRP520 Models)

95

6

 

Registering to the Service Provider

To use an Internet phone service, you must register your SRP to the Internet 
Telephony Service Provider (ITSP).

NOTE

Each line tab must be configured separately. Each line tab can be configured for a 
different ITSP.

STEP 1

Log in to the Configuration Utility. If prompted, enter the administrative logon 
provided by the Service Provider. The default username and password are both 

admin

. 

STEP  2

Under the Voice menu, click the 

Line

 (Line 1-2) to choose the line interface that you 

want to modify.

STEP  3

In the Proxy and Registration section, enter the Proxy.

STEP  4

In the Subscriber Information section, enter the User ID and Password.

SIP Over TLS

The SRP allows the use of SIP over Transport 
Layer Security (TLS). SIP over TLS is designed to 
eliminate the possibility of malicious activity by 
encrypting the SIP messages between the 
service provider and the end user. SIP over TLS 
relies on the widely-deployed and standardized 
TLS protocol. SIP Over TLS encrypts only the 
signaling messages and not the media. A 
separate secure protocol such as Secure Real-
Time Transport Protocol (SRTP) can be used to 
encrypt voice packets. SIP over TLS is configured 
in the SIP Transport parameter configured in the 
Line pages. See 

Line Pages (1–2), page 156

.

Feature

Description

Summary of Contents for SR520-FE-K9






































































































































































































































Reviews:

No comments

Related manuals for SR520-FE-K9

Homefibre OMA111WLAN-220 Installation Instructions preview
OMA111WLAN-220
Brand: Homefibre Pages: 2
Arris SURFboard SBR-AC1200P User Manual preview
SURFboard SBR-AC1200P
Brand: Arris Pages: 58
Sennheiser HDR 120-W Instruction Manual preview
HDR 120-W
Brand: Sennheiser Pages: 25
ZyXEL Communications G-1000 V2 Quick Start Manual preview
G-1000 V2
Brand: ZyXEL Communications Pages: 11
Lancom OAC-54-1 Manual preview
OAC-54-1
Brand: Lancom Pages: 79
S&C SpeedNet SDR Series Instruction Sheet preview
SpeedNet SDR Series
Brand: S&C Pages: 16
TP-Link TD-W8920G User Manual preview
TD-W8920G
Brand: TP-Link Pages: 85
Airlink101 AR580W3G User Manual preview
AR580W3G
Brand: Airlink101 Pages: 134
Compaq iPAQ Connection Point CP-1 User Manual preview
iPAQ Connection Point CP-1
Brand: Compaq Pages: 50
Reliance Wi-Fi SER8189 User Manual preview
Wi-Fi SER8189
Brand: Reliance Pages: 33
TP-Link AX75 V1 Quick Installation Manual preview
AX75 V1
Brand: TP-Link Pages: 2
Canon Board-C1 Installation Procedure preview
Board-C1
Brand: Canon Pages: 7
D-Link DSL-2730R Quick Installation Manual preview
DSL-2730R
Brand: D-Link Pages: 16
D-Link DSL Series Configuration Manual preview
DSL Series
Brand: D-Link Pages: 10
D-Link DIR-905L Quick Installation Manual preview
DIR-905L
Brand: D-Link Pages: 32
D-Link dlinkgo GO-RTW-N300 Brochure & Specs preview
dlinkgo GO-RTW-N300
Brand: D-Link Pages: 3
D-Link DSR-1000AC Quick Installation Manual preview
DSR-1000AC
Brand: D-Link Pages: 72
D-Link DIR-900L Quick Installation Manual preview
DIR-900L
Brand: D-Link Pages: 32

Brands by name

Popular brands

Load more brands