Cisco SR520-FE-K9 Administration Manual Download Page 47

Page: 47 / 229

Setting up the Interfaces of the Services Ready Platforms

Setting up the VLAN Interfaces and LAN Ports

Cisco SRP500 Series Services Ready Platforms Administration Guide (SRP520 Models)

Port Settings

Use the Port Settings page to set the LAN port attributes, edit the port settings, or
view the port settings.

STEP 1

Click Interface Setup > LAN > Port Setting. The

Port Setting

window opens.

STEP 2

Specify the flow control and speed duplex settings as defined in the

Port

Settings

table. You can only configure these settings for LAN ports 1–4.

STEP 3

To view the port information, click any of the items in the Port List. The port
information is displayed in the Port Details table.

STEP 4

To edit a port entry, click the

Edit

(pencil) icon. The VLAN Port Settings window

opens.

STEP 5

Specify the port settings as defined in the

Port Settings

table.

STEP 6

Click

Submit

to save your settings.

Port Settings

Field

Description

Mode

Describes the currently configured behavior of the port.

•

Desktop mode

: Provides attached devices with access to

a single data VLAN for which the SRP provides DHCP
services. Incoming traffic from the host can be tagged or
untagged. Outgoing traffic to the host will be untagged.

•

IP Phone + Desktop mode

: The port is configured with a

data VLAN for native access and a voice VLAN for use
with an attached IP Phone. CDP is used to communicate
voice VLAN information to the phone.

Summary of Contents for SR520-FE-K9






































































































































































































































Search results

Summary of Contents for SR520-FE-K9

Reviews:

Related manuals for SR520-FE-K9

Brands by name

Popular brands

Cisco SR520-FE-K9, Administration Manual

Search results

Summary of Contents for SR520-FE-K9

Reviews:

Related manuals for SR520-FE-K9

Brands by name

Popular brands