Configuring Voice
Configuring Voice Services
Cisco SRP500 Series Services Ready Platforms Administration Guide (SRP520 Models)
93
6
Signaling Hook Flash Event
The SRP can signal hook flash events to the proxy
during a connected call. This feature can be used
to provide advanced mid-call services with third-
party-call control.
Depending on the features that the service
provider offers using third-party-call-control, the
following ATA features may be disabled to
correctly signal a hookflash event to the
softswitch:
•
Call Waiting Service
: Refers to the call waiting
serv parameter in the Line pages.
•
Three Way Conference Service
: Refers to the
three-way conf serv parameter in the Line
pages.
•
Three Way Call Service
: Refers to the three-
way call serv parameter in the Line pages.
You can configure the length of time allowed for
detection of a hook flash using the Hook Flash
Timer parameter on the Regional page. See
Regional Page, page 136
.
Configurable Dial Plan with
Interdigit Timers
The SRP has three configurable interdigit timers:
•
Initial timeout (T)
—Signals that the handset is
off the hook and that no digit has been
pressed yet.
•
Long timeout (L)
—Signals the end of a dial
string; that is, no more digits are expected.
•
Short timeout (S)
—Used between digits; that
is after a digit is pressed a short timeout
prevents the digit from being recognized a
second time.
See
Configuring Dial Plans, page 102
for more
information.
Feature
Description
