Configuring Voice
Configuring Dial Plans
110
Cisco SRP500 Series Services Ready Platforms Administration Guide (SRP520 Models)
6
EXAMPLE
:
(9,8<:1408>[2-9]xxxxxx |
9,8,1[2-9]xxxxxxxxxS0
| 9,8,011xx.
| 9,8,xx.|[1-8]xx)
9,8,1[2-9]xxxxxxxxxS0
With the timer set to 0, the call is transmitted
automatically when the user dials the final digit in the sequence.
Editing Dial Plans
You can edit dial plans and can modify the control timers.
Entering the Line Interface Dial Plan
This dial plan is used to strip steering digits from a dialed number before it is
transmitted out to the carrier.
STEP 1
Log in to the Configuration Utility. If prompted, enter the administrative logon
provided by the Service Provider. The default username and password are both
admin
.
STEP 2
Under the Voice menu, click the Line (Line 1–2) to choose the line interface that
you want to modify.
STEP 3
Scroll down to the
Dial Plan
section.
STEP 4
Enter the digit sequences in the
Dial Plan
field. For more information, see
About
Dial Plans, page 102
.
STEP 5
Click
Submit
to save your settings.
Resetting the Control Timers
You can use the following procedure to reset the default timer settings for all calls.
NOTE
To edit a timer setting only for a particular digit sequence or type of call, you can
edit the dial plan. See
About Dial Plans, page 102
.
STEP 1
Log in to the Configuration Utility. If prompted, enter the administrative logon
provided by the Service Provider. The default username and password are both
admin
.
STEP 2
Under the Voice menu, click
Regional
.
