Configuring the Network
Routing
Cisco SRP500 Series Services Ready Platforms Administration Guide (SRP520 Models)
63
5
Routing
This section describes how to configure various types of routing on the SRP
including:
•
Static Routes
•
RIP
•
Intervlan Routing
To access these pages click
Network Setup > Routing
from the Configuration
Utility.
Static Routes
Use the Static Routes page to configure static routes for network traffic.
STEP 1
Click
Network Setup > Routing > Static Routes
. The
Static Routes
window
opens.
From this page you can view the current static routing list and details of the
selected route, or add another route to the Static Routing List.
STEP 2
To add a static route, click
Add
Entry
.
The Static Routing window for the new entry opens.
STEP 3
Enter a name for the new route.
STEP 4
Enter the destination IP address and subnet mask for the specified network or host
to which want to assign a static route.
STEP 5
Enter the IP address of the gateway that allows for contact between the SRP and
the specified network or host.
STEP 6
Choose the interface for this route.
STEP 7
Click
Submit
to save your changes.
