9
Cisco SRP500 Series Services Ready Platforms Administration Guide (SRP520 Models)
210
Using Services Ready Platform Diagnostics
This chapter describes how to use diagnostic features of the Services Ready
Platforms.
•
Ping Test
•
Traceroute Test
•
Detect Active LAN Clients
To access these pages click
the Diagnostics Tab
from the Configuration Utility
menu bar.
Ping Test
Use the Ping Test page to test connectivity between the SRP and a connected
device on the network.
STEP 1
Click Diagnostics
>
Ping Test. The
Ping Test
window opens.
STEP 2
Enter the IP address or URL address that you want to ping.
STEP 3
Enter a packet size in bytes. The range is 32 to 65500 bytes.
STEP 4
Choose the number of times to ping from the drop-down list (5, 10, or Unlimited).
STEP 5
Click Start to Ping to start the test. After the test is complete, the test results
appear on the page.
STEP 6
Click
Close
to close the test results and display the form.
