Administration Settings
Time Setup
Cisco SRP500 Series Services Ready Platforms Administration Guide (SRP520 Models)
202
8
Time Setup
Use the Time Setup page to set the time zone parameters for your network. You
can configure the system time manually or configure it by using the Network Time
Protocol (NTP) server.
STEP 1
Click
Administration > Time Setup
. The
Time Setup
window opens.
STEP 2
Specify the settings for your time zone. Time zone is usually referred to as the local
time.
STEP 3
To setup the system clock manually, select
User Manual
and enter the date and
time zones. Enter the date format as "Year/Month/Day" and the time format as:
"Hour:Min:Sec."
STEP 4
To automatically set the time, configure the time zone settings as defined in the
Time Setup Settings
table.
File
Enter the name of the remote file.
Save As
Enter the filename for the file you are saving.
User Name
Enter a user name to access the remote file
User Password
Enter a password to access the remote file.
Timeout
Specify the session timeout value (in seconds). This is
the maximum time allowed for a connection session.
The connection timeout for HTTP and FTP sessions is 3
seconds.The connection timeout for TFTP is 1 second.
For HTTP and FTP, is a TCP reset response message
will terminate a session.
Retry
Specify the number of sessions that will retry if a
transient problem occurs in a session
Status
The status of the processing remote file.
File List table
Shows the name and size of the remote file.
Local TFTP Settings
Field
Description