manualshive.com logo in svg

Cisco SR520-FE-K9, Administration Manual

The Cisco SR520-FE-K9 is a powerful networking device that allows seamless connectivity and secure data transmission. To assist users in harnessing its full potential, an extensive Administration Manual is available for download, free of charge, from our website. Explore advanced features and configurations with ease, ensuring optimal performance and satisfaction.

Share
Download
background image

Configuring Voice

Configuring Voice Settings

Cisco SRP500 Series Services Ready Platforms Administration Guide (SRP520 Models)

167

6

 

Use DNS SRV

Whether to use DNS SRV lookup for Proxy and 
Outbound Proxy.

The default is no.

DNS SRV Auto Prefix

If enabled, the SRP will automatically prepend 
the Proxy or Outbound Proxy name with 
_sip._udp when performing a DNS SRV lookup 
on that name.

The default is no.

Proxy Fallback Intvl

This parameter sets the delay (sec) after which 
the SRP will retry from the highest priority proxy 
(or outbound proxy) servers after it has failed 
over to a lower priority server. This parameter is 
useful only if the primary and backup proxy 
server list is provided to the SRP via DNS SRV 
record lookup on the server name. (Using 
multiple DNS A record per server name does not 
allow the notion of priority and so all hosts will be 
considered at the same priority and the SRP will 
not attempt to fall back after a fail over).

The default is 3600

.

Proxy Redundancy 
Method

Select Normal or Based on SRV Port. The SRP 
creates an internal list of proxies returned in the 
DNS SRV records.

If you select Normal, the list contains proxies 
ranked by weight and priority. 

If you select Based on SRV Port, the SRP uses 
Bormal, the inspects the port number based on 
the first listed proxy port.

The default is Normal.

Voice Mail Server

Enter the URL or IP address of the server.

Mailbox Subscribe 
Expires

Sets subscription interval for voicemail message 
waiting indication.

Summary of Contents for SR520-FE-K9






































































































































































































































Reviews:

No comments

Related manuals for SR520-FE-K9

D-Link DIR-450 - 3G Mobile Router Wireless User Manual preview
DIR-450 - 3G Mobile Router Wireless
Brand: D-Link Pages: 79
A-Link WNAPc User Manual preview
WNAPc
Brand: A-Link Pages: 92
Bonein BN-T10 User Manual preview
BN-T10
Brand: Bonein Pages: 6
Ubiquiti UniFi AP AC Outdoor Quick Start Manual preview
UniFi AP AC Outdoor
Brand: Ubiquiti Pages: 26
Shenzhen Hongdian Technologies H8959-4GSPT User Manual preview
H8959-4GSPT
Brand: Shenzhen Hongdian Technologies Pages: 135
EnGenius EAP1250 User Manual preview
EAP1250
Brand: EnGenius Pages: 73
SMC Networks Barricade SMCWBR14S-N3 Manual preview
Barricade SMCWBR14S-N3
Brand: SMC Networks Pages: 106
LTE ALM-N245 User Manual preview
ALM-N245
Brand: LTE Pages: 47
Digi DR6410W Installation Manual preview
DR6410W
Brand: Digi Pages: 9
Arista C-120 Quick Start Manual preview
C-120
Brand: Arista Pages: 14
Arista AP-O235 Getting Started Manual preview
AP-O235
Brand: Arista Pages: 4
Arista AP-C230 Getting Started Manual preview
AP-C230
Brand: Arista Pages: 4
Harman JBL TUNE220TWS Quick Start Manual preview
JBL TUNE220TWS
Brand: Harman Pages: 23
T-Mobile GALAXYS 4G Start Manual preview
GALAXYS 4G
Brand: T-Mobile Pages: 16
EnGenius EOC-5610 User Manual preview
EOC-5610
Brand: EnGenius Pages: 64
EnGenius ENS620EXT User Manual preview
ENS620EXT
Brand: EnGenius Pages: 71
EnGenius ENH220EXT User Manual preview
ENH220EXT
Brand: EnGenius Pages: 67
EnGenius ENH200EXT User Manual preview
ENH200EXT
Brand: EnGenius Pages: 86

Brands by name

Popular brands

Load more brands