Administration Settings
Remote Management
Cisco SRP500 Series Services Ready Platforms Administration Guide (SRP520 Models)
199
8
SNMP
SNMP is a network monitoring and management protocol that lets you monitor and
manage your network from an SNMP manager. SNMP provides allows you to
monitor and control network devices, and manage configurations, statistics
collection, performance, and security. The SRP supports SNMPv2.
STEP 1
Click A
dministration > Remote Management > SNMP
. The
SNMP
window
opens.
STEP 2
To enable SNMP, click
Enabled
.
STEP 3
Select a trusted IP setting. You can select from
Any
,
Address
, or
Netmask
. Any is
not recommended.
STEP 4
Enter the Get and Set community passwords.
The Get Community password allows read-only access to the Gateway's SNMP
information. The Set Community password allows both read and write access.
STEP 5
Click Submit to save your settings.
Request Download
Click
Apply
if you want to immediately initiate a
connection to the ACS. The ACS calls the Download
RPC when it receives the request.
TR-069 Settings
Field
Description
SNMP Settings
Field
Description
Enable/Disable
To enable SNMP identification, click Enabled. The
default is Disabled.
Trusted IP
Choose
Any
to allow access from any IP address (not
recommended), or enter the IP address and subnet
mask of a single SNMP manager or trap agent that can
access the SRP through SNMP.
