S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
22-353
Cisco MDS 9000 Family Command Reference
OL-18089-01, Cisco MDS NX-OS Release 4.x
Chapter 22 Show Commands
show santap module
show santap module
To display the SANTap configuration on the Storage Services Module (SSM), use the
show santap
module
command in EXEC mode.
show santap module
slot
{
avt
[
name |
brief
]
|
avtlun
|
cvt
[cvt-id
|
brief
]
| dvt
[
name |
brief
]
|
dvtlun
|
rvt
[
name |
brief
]
|
rvtlun
|
session
[
session-id
| brief
] |
tech-support
}
Syntax Description
Defaults
None.
Command Modes
EXEC mode.
Command History
Usage Guidelines
None.
Examples
The following example displays the SANTap AVT configuration.
switch#
show santap module 2 avt
AVT Information :
avt pwwn = 2a:4b:00:05:30:00:22:25
avt nwwn = 2a:60:00:05:30:00:22:25
avt id = 12
slot
Displays SANTap configuration for a module in the specified slot.
avt
Displays the appliance virtual target (AVT) configuration.
avtlun
Displays the appliance AVT LUN configuration.
cvt
Displays the control virtual target (CVT) configuration.
cvt-id
Specifies a user configured CVT ID. The range is 1 to 65536.
dvt
Displays the data virtual target (DVT) configuration.
dvtlun
Displays the DVT LUN configuration.
rvt
Displays the remote virtual target (AVT) configuration.
rvtlun
Displays the RVT LUN configuration.
session
Displays the SANTap session information.
session-id
Specifies a user configured session ID. The range is 1 to 65536.
name
Specifies the user name.
brief
Displays a brief format version of the display.
tech-support
Displays information for technical support.
Release
Modification
2.1(1a)
This command was introduced.
3.1(2)
Added the
tech-support
option.
