manualshive.com logo in svg

Cisco MDS 9000 Series, Command Reference Manual

Share
Download
Cisco MDS 9000 Series Command Reference Manual Download Page 1232

S e n d   d o c u m e n t a t i o n   c o m m e n t s   t o   m d s f e e d b a c k - d o c @ c i s c o . c o m

22-164

Cisco MDS 9000 Family Command Reference

OL-18089-01, Cisco MDS NX-OS Release 4.x

Chapter 22      Show Commands

    show interface

show interface 

You can check the status of an interface at any time by using the 

show interface

 command.

show interface 

[

interface-range

] [

bbcredit

 | 

brief 

|

 capabilities | counters 

[

brief

] |

 description 

|

 

transceiver 

[

calibrations 

|

 details

]

 

|

 trunk vsan 

[

vsan-id

]]

Syntax Description

Defaults

Displays information for all interfaces on the switch.

Command Modes

EXEC 

Command History

Usage Guidelines

You can specify a range of interfaces by issuing a command with the following example format:

interface

 

fc1/1

 

-

 

5

 

,

 

fc2/5

 

-

 

7

The spaces are required before and after the dash ( - ) and before and after the comma ( , ).

The

 show interface 

interface-type slot/port 

transceiver

 command can only be issued on a switch in the 

Cisco MDS 9100 Series if the SFP is present.

Table 22-5

 lists the interface types supported by the 

show interface 

command.

interface-range

Displays the type of interface.

bbcredit

Displays buffer-to-buffer credit information.

brief

Displays brief information.

capabilities

Displays hardware port capabilities for a specified interface.

counters

Displays the interface counter information.

description

Displays the interface description.

transceiver

Displays the transceiver information for a specified interface.

calibrations

Displays transceiver calibration information for the specified interface.

details

Displays detailed transceiver diagnostics information for the specified 
interface.

trunk vsan 

Displays the trunking status of all VSANs.

vsan-id

Displays the trunking status of the specified VSANs. The range is 1 to 4093.

Release

Modification

1.0(2)

This command was introduced.

1.3(1)

Added the 

bbcredit 

keyword and support for cpp and fv interfaces.

3.0(1)

Added the 

capabilities

 option for Fibre Channel interfaces.

3.1(2)

Added the 

bay

 | 

ext

 interface.

NX-OS 4.1(1b)

Added the command output for bbcredit information for a switch port.

NX-OS 4.1(1b)

Added the command output for interface capabilities on a 48 port line card.

Summary of Contents for MDS 9000 Series









































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands