
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
5-21
Cisco MDS 9000 Family Command Reference
OL-18089-01, Cisco NX-OS Release 4.x
Chapter 5 D Commands
device-alias (SDV virtual device configuration submode)
device-alias (SDV virtual device configuration submode)
To add a device alias to a virtual device, use the
device-alias
command in SDV virtual device
configuration submode. To remove a device alias, use the
no
form of the command.
device-alias
device-name
[
primary
]
no device-alias
device-name
[
primary
]
Syntax Description
Defaults
None.
Command Modes
SDV virtual device configuration submode.
Command History
Usage Guidelines
None.
Examples
The following example shows how to configure a virtual target alias name:
switch#
config terminal
Enter configuration commands, one per line. End with CNTL/Z.
switch(config)#
sdv virtual-device name sqa1 vsan 1
switch(config-sdv-virt-dev)#
device-alias group1 primary
Related Commands
device-name
Specifies the device name. Maximum length is 64 characters.
primary
(Optional) Specifies the device as a primary device.
Release
Modification
3.1(2)
This command was introduced.
Command
Description
sdv enable
Enables or disables SAN device virtualization.
show sdv statistics
Displays SAN device virtualization statistics.