S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
11-42
Cisco MDS 9000 Family Command Reference
OL-18089-01, Cisco MDS NX-OS Release 4.x
Chapter 11 I Commands
ip access-group
switch#
config terminal
Enter configuration commands, one per line. End with CNTL/Z.
switch(config)#
ip access-list aclDenyTcp deny tcp any any
switch(config)#
interface gigabitethernet 3/1
switch(config-if)#
ip access-group aclDenyTcp in
The following example deletes the access group called aclDenyTcp for ingress traffic:
switch(config-if)#
no
ip access-group aclDenyTcp in
The following example creates an access list called aclPermitUdp (if it does not already exist) for local
egress traffic:
switch#
config terminal
Enter configuration commands, one per line. End with CNTL/Z.
switch(config)#
ip access-list aclPermitUdp permit udp 192.168.32.0 0.0.7.255 any
switch(config)#
interface gigabitethernet 3/1
switch(config-if)#
ip access-group aclPermitUdp out
The following example removes the access list called aclPermitUdp for local egress traffic:
switch(config-if)#
no ip access-group aclPermitUdp out
Related Commands
Command
Description
ip access-list
C
onfigures IP access control lists.
show ip access-list
Displays the IP-ACL configuration information.
