S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
2-32
Cisco MDS 9000 Family Command Reference
OL-18089-02, Cisco MDS NX-OS Release 4.x
Chapter 2 A Commands
attribute qos
attribute qos
To configure a QoS attribute, use the
attribute qos
command in Inter-VSAN Routing (IVR) zone
configuration submode. To disable this feature, use the
no
form of this command.
attribute qos
{
high
|
low
|
medium
}
no attribute qos
{
high
|
low
|
medium
}
Syntax Description
Defaults
Disabled.
Command Modes
IVR zone configuration submode.
Command History
Usage Guidelines
None.
Examples
The following example shows how to configure an IVR zone QoS attribute to low priority:
switch#
config terminal
Enter configuration commands, one per line. End with CNTL/Z.
switch(config)#
ivr zone name IvrZone
switch(config-ivr-zone)#
attribute qos priority low
Related Commands
high
Configures frames matching zone to get high priority.
low
Configures frames matching zone to get low priority (default).
medium
Configures frames matching zone to get medium priority.
Release
Modification
2.1(1a)
This command was introduced.
Command
Description
show ivr zone
Displays IVR zone configuration.
