S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
22-77
Cisco MDS 9000 Family Command Reference
OL-18089-01, Cisco MDS NX-OS Release 4.x
Chapter 22 Show Commands
show dpvm
show dpvm
To display dynamic port VSAN membership (DPVM) information, use the
show dpvm
command.
show dpvm
{
database
[
active
] |
pending
|
pending-diff
|
ports
[
vsan
vsan-id
] |
status
}
Syntax Description
Defaults
None.
Command Modes
EXEC mode.
Command History
Usage Guidelines
To use this command, DPVM must be enabled using the
dpvm enable
command.
Examples
The following example shows how to display DPVM database information:
switch#
show dpvm database
pwwn 00:00:00:00:00:00:00:01 vsan 1
pwwn 00:00:00:00:00:00:00:02 vsan 1
[Total 2 entries]
Related Commands
database
Displays both the configured and active DPVM databases.
active
Displays only the active DPVM database.
pending
Displays pending DPVM operations.
pending-diff
Displays differences between the pending DPVM operations and the active
DPVM database.
ports
Displays DPVM information for the ports.
vsan
vsan-id
Specifies a VSAN ID. The range is from 0 to 4093.
status
Displays DPVM status information.
Release
Modification
2.0(x)
This command was introduced.
Command
Description
dpvm database
Configures the DPVM database.
