S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
22-173
Cisco MDS 9000 Family Command Reference
OL-18089-01, Cisco MDS NX-OS Release 4.x
Chapter 22 Show Commands
show interface sme
show interface sme
To display the information about Cisco SME interface, use the
show interface sme
command.
command.
show interface sme
slot/port
{brief | counters | description}
Syntax Description
Defaults
None.
Command Modes
EXEC mode.
Command History
Usage Guidelines
None.
Examples
The following example displays the brief description of the Cisco SME interface:
switch#
show interface sme 3/1 brief
------------------------------------------------------------------------------
Interface Status Cluster
------------------------------------------------------------------------------
sme3/1 up c2
The following example displays the counters of the interface:
switch#
show interface sme 3/1 description
sme3/1
5 minutes input rate 0 bits/sec, 0 bytes/sec, 0.00 KB/sec
5 minutes output rate 0 bits/sec, 0 bytes/sec, 0.00 KB/sec
SME statistics
input 0 bytes, 5 second rate 0 bytes/sec, 0.00 KB/sec
clear 0 bytes, encrypt 0 bytes, decrypt 0
compress 0 bytes, decompress 0 bytes
output 0 bytes, 5 second rate 0 bytes/sec, 0.00 KB/sec
clear 0 bytes, encrypt 0 bytes, decrypt 0
compress 0 bytes, decompress 0 bytes
compression ratio 0:0
flows 0 encrypt, 0 clear
slot
Identifies the number of the MPS-18/4 module slot.
port
Identifies the number of the Cisco SME port.
brief
Displays the brief information about Cisco SME interface.
counters
Displays the interface counters.
description
Displays the description of the interface.
Release
Modification
3.2(2)
This command was introduced.
