manualshive.com logo in svg

Cisco MDS 9000 Series, Command Reference Manual

Share
Download
Cisco MDS 9000 Series Command Reference Manual Download Page 1218

S e n d   d o c u m e n t a t i o n   c o m m e n t s   t o   m d s f e e d b a c k - d o c @ c i s c o . c o m

22-150

Cisco MDS 9000 Family Command Reference

OL-18089-01, Cisco MDS NX-OS Release 4.x

Chapter 22      Show Commands

    show hardware

show hardware

To display switch hardware inventory details, use the 

show hardware 

command.

show hardware 

[

ipc-channel status

]

 

Syntax Description

Defaults

None.

Command Modes

EXEC mode.

Command History

Usage Guidelines

None.

Examples

The following example displays the switch hardware inventory details.

switch# 

show hardware

Cisco Nexus Operating System (NX-OS) Software

TAC support: http://www.cisco.com/tac

Copyright (c) 2002-2008, Cisco Systems, Inc. All rights reserved.

The copyrights to certain works contained in this software are

owned by other third parties and used and distributed under

license. Certain components of this software are licensed under

the GNU General Public License (GPL) version 2.0 or the GNU

Lesser General Public License (LGPL) Version 2.1. A copy of each

such license is available at

http://www.opensource.org/licenses/gpl-2.0.php and

http://www.opensource.org/licenses/lgpl-2.1.php

Software

  BIOS:      version 3.17.0

  loader:    version N/A

  kickstart: version 4.0(3) [gdb]

  system:    version 4.0(3) [gdb]

  BIOS compile time:       03/23/08

  kickstart image file is: bootflash:/n7000-s1-kickstart.4.0.3.gbin.S17

  kickstart compile time:  7/24/2008 12:00:00 [07/28/2008 03:28:06]

  system image file is:    bootflash:/n7000-s1-dk9.4.0.3.gbin.S17

  system compile time:     7/24/2008 12:00:00 [07/28/2008 04:10:26]

Hardware

  cisco Nexus7000 C7010 (10 Slot) Chassis ("Supervisor module-1X")

  Intel(R) Xeon(R) CPU         with 2063436 kB of memory.

ipc-channel status

Displays the status of the interprocess communication (IPC) channels.

Release

Modification

1.2(1)

This command was introduced.

NX-OS 4.1(1b)

Changed the command output from SAN-OS to NX-OS.

Summary of Contents for MDS 9000 Series









































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands