S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
23-39
Cisco MDS 9000 Family Command Reference
OL-18089-01, Cisco MDS NX-OS Release 4.x
Chapter 23 T Commands
tcp qos control
tcp qos control
To specify the differentiated services code point (DSCP) value to mark all IP packets (type of
service—TOS field in the IP header), use the
tcp qos control
command. Use the
no
form of this
command to disable this feature or revert to its factory defaults.
tcp qos control
value
data
value
no tcp qos control
value
data
value
Syntax Description
Defaults
Enabled.
Command Modes
FCIP profile configuration submode.
Command History
Usage Guidelines
Use these TCP parameters to control TCP retransmission behavior in a switch.
Examples
The following example configures a FCIP profile:
switch#
config terminal
switch(config)#
fcip profile 5
switch(config-profile)#
The following example configures the control TCP connection and data connection to mark all packets
on that DSCP value:
switch(config-profile)#
tcp qos control 3 data 5
Related Commands
value
Applies the control DSCP value to all FCIP frames in the control TCP
connection.
data
value
Applies the data DSCP value applies to all FCIP frames in the data
connection.
Release
Modification
1.1(1)
This command was introduced.
Command
Description
fcip profile
Configures FCIP profile parameters.
show fcip profile
Displays FCIP profile information.
