manualshive.com logo in svg

Cisco MDS 9000 Series, Command Reference Manual

The Cisco MDS 9000 Series is a high-performance storage networking solution. Ensure a smooth setup with the Installation and Configuration Note - a comprehensive manual available for free download on manualshive.com. This user-friendly manual guides you through every step, making installation and configuration a breeze for optimal performance.

Share
Download
background image

S e n d   d o c u m e n t a t i o n   c o m m e n t s   t o   m d s f e e d b a c k - d o c @ c i s c o . c o m

22-233

Cisco MDS 9000 Family Command Reference

OL-18089-01, Cisco MDS NX-OS Release 4.x

Chapter 22      Show Commands

    show islb vrrp

                  41                          IPv4                       Enabled

                  42                          IPv4                       Enabled

                       -- Interfaces For Load Balance --

--------------------------------------------------------------------------------

 VR Id         VRRP IP              Switch WWN                 Ifindex      Load

--------------------------------------------------------------------------------

    41   10.10.122.112 20:00:00:0d:ec:02:cb:00  GigabitEthernet1/1.441      3000

    41   10.10.122.112 20:00:00:0d:ec:02:cb:00  GigabitEthernet1/2.441      2000

    41   10.10.122.112 20:00:00:0d:ec:0c:6b:c0  GigabitEthernet2/1.441      2000

M   41   10.10.122.112 20:00:00:0d:ec:0c:6b:c0  GigabitEthernet2/2.441      1000

    41   10.10.122.112 20:00:00:0d:ec:0c:6b:c0  GigabitEthernet2/3.441      2000

M   42   10.10.142.111 20:00:00:0d:ec:0c:6b:c0  GigabitEthernet2/1.442      2000

    42   10.10.142.111 20:00:00:0d:ec:0c:6b:c0  GigabitEthernet2/2.442      1000

    42   10.10.142.111 20:00:00:0d:ec:0c:6b:c0  GigabitEthernet2/3.442      2000

                    -- Initiator To Interface Assignment --

--------------------------------------------------------------------------------

Initiator  VR Id         VRRP IP              Switch WWN                 Ifindex

--------------------------------------------------------------------------------

iqn.1987-05.com.cisco:01.09ea2e99c97

              41   10.10.122.112 20:00:00:0d:ec:0c:6b:c0  GigabitEthernet2/1.441

iqn.1987-05.com.cisco:01.5ef81885f8d

              41   10.10.122.112 20:00:00:0d:ec:0c:6b:c0  GigabitEthernet2/3.441

iqn.1987-05.com.cisco:01.8fbdb3fdf8

              41   10.10.122.112 20:00:00:0d:ec:02:cb:00  GigabitEthernet1/1.441

iqn.1987-05.com.cisco:01.99eddd9b134

              41   10.10.122.112 20:00:00:0d:ec:02:cb:00  GigabitEthernet1/1.441

iqn.1987-05.com.cisco:01.a1398a8c6bc6

              41   10.10.122.112 20:00:00:0d:ec:0c:6b:c0  GigabitEthernet2/3.441

iqn.1987-05.com.cisco:01.e15c63d09d18

              41   10.10.122.112 20:00:00:0d:ec:02:cb:00  GigabitEthernet1/2.441

iqn.1987-05.com.cisco:01.e9aab57a51e0

              41   10.10.122.112 20:00:00:0d:ec:02:cb:00  GigabitEthernet1/1.441

iqn.1987-05.com.cisco:01.ecc2b77b6086

              41   10.10.122.112 20:00:00:0d:ec:0c:6b:c0  GigabitEthernet2/2.441

iqn.1987-05.com.cisco:01.f047da798a44

              41   10.10.122.112 20:00:00:0d:ec:02:cb:00  GigabitEthernet1/2.441

iqn.1987-05.com.cisco:01.f686f5cd11f

              41   10.10.122.112 20:00:00:0d:ec:0c:6b:c0  GigabitEthernet2/1.441

The following example shows iSLB VRRP summary information for vr 41.

switch# 

show islb vrrp summary vr 41

                         -- Groups For Load Balance --

--------------------------------------------------------------------------------

               VR Id             VRRP Address Type             Configured Status

--------------------------------------------------------------------------------

                  41                          IPv4                       Enabled

                       -- Interfaces For Load Balance --

--------------------------------------------------------------------------------

 VR Id         VRRP IP              Switch WWN                 Ifindex      Load

--------------------------------------------------------------------------------

    41   10.10.122.112 20:00:00:0d:ec:02:cb:00  GigabitEthernet1/1.441      3000

    41   10.10.122.112 20:00:00:0d:ec:02:cb:00  GigabitEthernet1/2.441      2000

    41   10.10.122.112 20:00:00:0d:ec:0c:6b:c0  GigabitEthernet2/1.441      2000

M   41   10.10.122.112 20:00:00:0d:ec:0c:6b:c0  GigabitEthernet2/2.441      1000

    41   10.10.122.112 20:00:00:0d:ec:0c:6b:c0  GigabitEthernet2/3.441      2000

                    -- Initiator To Interface Assignment --

--------------------------------------------------------------------------------

Initiator  VR Id         VRRP IP              Switch WWN                 Ifindex

Summary of Contents for MDS 9000 Series









































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for MDS 9000 Series

GE Mentor Visual iQ Quick Start Manual preview
Mentor Visual iQ
Brand: GE Pages: 2
E-line CJ-HDR104 User Manual preview
CJ-HDR104
Brand: E-line Pages: 164
Raymarine ST40 Wind Owner'S Handbook Manual preview
ST40 Wind
Brand: Raymarine Pages: 42
YATO YT-72977 Manual preview
YT-72977
Brand: YATO Pages: 36
Autometers Systems A-400 Series Programming And Installation Brochure preview
A-400 Series
Brand: Autometers Systems Pages: 16
StarLogixs LiveTester LT 220 Operation Manual preview
LiveTester LT 220
Brand: StarLogixs Pages: 7
Baker Hughes Panametrics XDP User Manual preview
Panametrics XDP
Brand: Baker Hughes Pages: 64
IROX PE-DRO Operating Instructions Manual preview
PE-DRO
Brand: IROX Pages: 8
Liquid Controls A8981 Installation And Parts preview
A8981
Brand: Liquid Controls Pages: 16
Erma Electronic SSI 3020 Instruction Manual preview
SSI 3020
Brand: Erma Electronic Pages: 24
Cewe DPM96 Series Operating Manual preview
DPM96 Series
Brand: Cewe Pages: 8
EXFO Optical Power Expert User Manual preview
Optical Power Expert
Brand: EXFO Pages: 93
Xylem wtw Cleaning Air Box -115 VAC Operating Manual preview
wtw Cleaning Air Box -115 VAC
Brand: Xylem Pages: 32
E Instruments BTU900 Manual preview
BTU900
Brand: E Instruments Pages: 64
Keysight InfiniiMax III+ Series User Manual preview
InfiniiMax III+ Series
Brand: Keysight Pages: 162
Level Pro ITC 450 User Manual preview
ITC 450
Brand: Level Pro Pages: 59
VOLTCRAFT AM-96X96 Operating Instructions preview
AM-96X96
Brand: VOLTCRAFT Pages: 4
Hesai 4498 Technical Documentation Manual preview
4498
Brand: Hesai Pages: 8

Brands by name

Popular brands

Load more brands