S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
6-94
Cisco MDS 9000 Family Command Reference
OL-18089-01, Cisco MDS NX-OS Release 4.x
Chapter 6 Debug Commands
debug qos
debug qos
To enable debugging for quality of service (QoS), use the
debug qos
command in EXEC mode. To
disable a
debug
command, use the
no
form of the command or use the
no debug all
command to turn
off all debugging.
debug qos
{
all
[
interface fc
slot
/
port
] |
detail
|
errors supervisor
|
flow
|
trace
}
no debug qos
{
all
[
interface fc
slot
/
port
] |
detail
|
errors supervisor
|
flow
|
trace
}
Syntax Description
Defaults
Disabled.
Command Modes
EXEC mode.
Command History
Usage Guidelines
None.
Examples
The following example displays the system output when the
debug qos all
command is issued:
switch#
debug qos all
Related Commands
all
Enables all QoS debug options.
interface fc
slot/port
(Optional) Restricts debugging to the specified interface.
detail
Enables all QoS debug output.
errors supervisor
Enables debugging for supervisor QoS error conditions.
flow
Enables flow-level QoS debug options.
trace
Enables debugging for QoS traces.
Release
Modification
1.0(2)
This command was introduced.
Command
Description
no debug all
Disables all debugging.
show qos
Displays the current QoS settings along with a the number of frames marked
high priority.
